Iqinvision Alliance-pro Sun Shield Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Iqinvision Alliance-pro Sun Shield. IQinVision Alliance-pro Sun Shield User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
IQA-SS Alliance-pro
Sun Shield
Installation Instructions
1 Service
If the unit needs repair service or parts, the customer should contact
IQinVision for a Return Merchandise Authorization (RMA), as well as shipping
instructions.
IQinVision
33122 Valle Road
San Juan Capistrano, CA 92675-4853
Phone: +1-949-369-8100 or 1-877-850-0805 (toll-free in U.S.)
Fax: +1-949-369-8105
2 Unpacking
1. The Alliance-pro Sun Shield assembly includes the following:
(1) Sun Shield
(2) Standoffs
2. Required Tools
(1) Torx T-20 Security Wrench (Supplied with Alliance-pro dome)
(1) Allen Hex Key 4mm
3 Installation
1. Remove (2) tamper-proof screws from the
Alliance-pro trim ring closest to the top of the
assembly using the Torx T-20 Security Wrench
supplied with the Alliance-pro dome (see Figure
1). TIP: These are captive screws but unscrewing
them far enough, then turning the trim ring
upside down (if possible), they will thread out.
2. Screw in the (2) standoffs in place of the tamper-
proof screws removed in step 1 above using the
Allen key.
3. Position the slots in the Sun Shield over the top of the standoffs just
installed and rotate it to the optimum position to shield the dome from
sunlight and rain.
4. Secure the Sun Shield to the dome trim ring by screwing in the (2)
previously removed tamper-proof screws into the standoffs using the Torx
T-20 Security Wrench.
901-0316 Rev A
Remove two adjacent
screws from dome trim ring
Figure 1
Vue de la page 0
1

Résumé du contenu

Page 1

IQA-SS Alliance-proSun Shield Installation Instructions1 ServiceIf the unit needs repair service or parts, the customer should contact IQinVision for

Commentaires sur ces manuels

Pas de commentaire